Open

CCTV PRACTICAL COURSE

CCTV PRACTICAL COURSE

CCTV PRACTICAL INSTALLATION COURSE: EIS CERTIFIED.

CCTV PRACTICAL INSTALLATION COURSES:

Next Class: 1st - 11th Nov 2021

Course Overview:

On this CCTV practical installation course, you will gain well explained theoretical and hands on practical trainings. Over the years, many people think CCTV is only applicable to security monitoring and surveillance, however, on this 10 days intensive learning, you will understand various uses of CCTV in every sector of the economy. With this training, the trainee will understand the CCTV industry and market potentials.  

From learning about complete system design, cable structuring to mastering of analogue, AHD and IP integration methods, you will leave with confidence to challenge every situation throughout your career as a CCTV engineer.

This practical training course requires no initial knowledge of CCTV or electrical wiring. We will guide you through from scratch to perfection.

This course is practically designed for those who intend to gain knowledge about CCTV industry, its wide application of use and who want to master the professional CCTV installations. The dos and don’ts, strict adherent to CCTV compliance rules over clients data, CCTV system integration to other systems such as Fire Alarm, Access Control etc, system designing using auto card.

It is also designed for retired officers who want to engage further by starting up some security businesses as a seller of CCTV equipment, companies and government departments can train up their staff to gain extra knowledge for crime prevention, fighting and investigation purposes.

System Design remain the most critical part of CCTV installation and maintenance. Initial designing with appropriate designing software like the one we use to carry out our training will give you insight and confidence to challenge any type of small, medium and large project. 
Monitoring Zone
Detection Zone
Observation Zone
Recognition Zone
Identification
Super Identification 1000PPM
STARTER INSTALLATION KIT

 

 

 

Starter Kit Contents: Coming soon

 

BELOW ARE FEW LIST OF WHAT YOU WILL LEARN:

1. THE CCTV INDUSTRY

    * History and Development of CCTV Industry

     *The role of CCTV

     *Component parts and equipment

     *CCTV applications and operational features

     *CCTV perceived effectiveness and cost

     *Technical standards and regulations

     *Video standards

     *Persistence of vision

     *Scanning 625 – Line system

     *Composite video

     *Monochrome video signal components

     *Setting up black and white colour

     *Over scan and under scan

     *Terminations switching and loop through

     *Resolution

     *Monitor viewing distance

     *The CRT monitor

     *The colour CRT

     *Colour video signal component

     *Ergonomics

     *Liquid crystal display (LCDs)

     *Plasma display panel (PDPs)

     *The cathode ray tube

  1. Signal Transmission

     *CCTV signal

     *Cable types and transmission methods

     *Co-axial cable

     *Ground loops

     *Twisted pair cable

     *URM70, RG59, CT125 RG11, Cables

     *Structural cabling

     *Power over Ethernet

     *Microwave link

     *Fibre-optic cable

     *Telephone PSTN/ISDN

     *Cable test equipment

     *Ribbon cable

     *UHF RF transmission

     *Cable loss

     *Characteristic impedance

     *Infrared beam

     *Connectors / Cable Joints

     *Cable selection and Installation

     *UHF RF transmission

     *CCTV via the telephone network

     *Free space transmission

  1. The CCTV Camera and Types

     *Camera specifications

     *The eye and the camera

     *Tube and CCD camera technologies

     *CMOS

     *CCD – Charge coupled device

     *CCD chip operation

     *Transfer types

     *CCD sensor availability: Frame transfer and Interline

     *FIT (Frame Interline Transfer)

     *EXWAVE Interlines

     *Electronics Iris

     *IR filters

     *Colour imagine/CCD colour

     *Specialist camera types

     *Camera operation

     *White balance

     *Automatic Electronics Shuttering (AES)

     *Automatic Gain Control (AGC)

     *Back Light Compensation (BLC)

     *Colour / mono cameras

     *Camera sensitivity

     *Camera resolution

     *Camera spectral consideration

     *Camera terminology

     *Illumination

     *Scene illumination

     *Camera CCD (Imager) illumination

     *Sensitivity

     *White balance

     *Phasing

     *The symptom

     *The remedy

     *Solution

     *Specialized camera

     *Covert/ Overt camera

     *Camera operating voltage

     *Mains supply direct connection

     *Line fed integrated supply

     *Extra low voltage supply

     *360 degree Camera

     *Comparison of cameras

     *Camera adjustment

     *Power supplies

     *Camera Housing and Domes

     *Ingress protection

     *Number plate recognition camera – ANPR

     *Camera accessories

  1. Lenses

     *Lens theory

     *Lens parameters

     *Zoom lenses

     *Manual and Auto iris lenses

     *Depth of field

     *Focal length

     *Fixed and Vari-Focal lenses

     *Electrical connections

     *Lens mouth

     *Lens filter

     *Lens filter setup

     *Back focusing

     *Direction for back focusing

     *Manual and Fixed iris lens back focus

     *Fixed auto iris lens back focus

     *Lens adjustment

     *C and CS mount

     *Format compatibility

     *Colour camera and colour corrected lenses

     *Lenses and lighting

     *Lens finding

  1. Light and Lighting
  1. Fundamentals of Television
  1. Video Recording Equipment Types
  1. Switching, Squads and Multiplexing
  1. Telemetry Control / Digital Video Recording
  1. CCTV over Network: CCTV over IP is offered on a different course; it will be briefly explained and basic practical is offered on this course.
  1. Equipment / Health & Safety

     *Camera mounts

     *Tower and columns

     *Scaffolding and ladders

     *Pan/tilt units

     *Monitor brackets

     *Power supply

     *Voltage drop

     *Equipment and tools

     *Work aid and power tools

     *Safe working practice

     *Safety precautions

  1. Commissioning Checklist Equipment
  1. The Operational Requirement and Lens Calculation

       *The operational requirement

       *The Rotakin

       *Application and use of Rotakin

       *Rotakin with moving and stationary target

       *Rotakin as detection target etc

  1. Reference Information

      *Response organisations

      *Multiplication factors

  1. Installation: CCTV Planning and Designed; Note CCTV planning and design is offered on a 3 days intensive separate course, a brief introduction is offered on this course

     *The use of OHMS law

     *Fuses

     *Power calculation

     *Composite video

     *Signal colour bars

     *Specialist tools

     *Test equipment

     *Monitor, pattern generator and oscilloscope

     *Basic operation

     *The oscilloscope

Venue: No 10. Hon. Abuchi Eze Street Vanguard Road Opp Asaba Int’l Airport Delta State Nigeria. Contact Us.